hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

fca2355 dual channel PCI host bus adapter installation guide 3–3
Installing the SCSI Miniport Driver
Windows 2000 Device Driver Installation
Windows 2000 System Requirements
Ensure that your system meets these minimum requirements:
• Installed HBA
• Windows 2000 Miniport driver and registry parameter file from the software kit
provided with the HBA
• Windows 2000 Service Pack 2 (recommended)
• StorageWorks Fibre Channel Storage subsystem (interconnect device and storage
device)
Installing the Windows 2000 SCSI Miniport Driver
This section contains the steps for installing the Windows 2000 SCSI Miniport device
driver on a Windows 2000 server.
NOTE: Because this is a dual channel HBA, you must install a driver for each channel. The
Device Manager shows two instances of the HBA. Perform the following steps for each instance.
Therefore, you perform the following steps twice.
From the Windows 2000 desktop:
1. Click Start > Settings > Control Panel.
2. Double-click Administrative Tools.
3. Double-click Computer Management.
4. Click Device Manager.
5. Open the SCSI and RAID controllers item in the list.
6. Select the Drivers tab.
7. Select Update Driver and click Next.
8. Select Display a list of known drivers for this device so that I can choose a
specific driver and click Next.
9. Click Have Disk and browse to the location of the HBA kit.
10. Select the .inf file for the HBA, click Open, click OK.
11. Select the HBA, click Next, click Next.