hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

fca2355 dual channel PCI host bus adapter installation guide 4–9
Troubleshooting
10 0-7 0x1E 0x73 0xD5 0x0A
11 0-7 0x1F 0x72 0xD4 0x0B
12 0-7 0x23 0x71 0xD3 0x0C
13 0-7 0x25 0x70 0xD2 0x0D
14 0-7 0x26 0x6F 0xD1 0x0E
15 0-7 0x27 0x6E 0xCE 0x0F
16 0-7 0x29 0x6D 0xCD 0x10
17 0-7 0x2A 0x6C 0xCC 0x11
18 0-7 0x2B 0x6B 0xCB 0x12
19 0-7 0x2C 0x6A 0xCA 0x13
20 0-7 0x2D 0x69 0xC9 0x14
21 0-7 0x2E 0x68 0xC7 0x15
22 0-7 0x31 0x67 0xC6 0x16
23 0-7 0x32 0x66 0xC5 0x17
24 0-7 0x33 0x65 0xC3 0x18
25 0-7 0x34 0x64 0xBC 0x19
26 0-7 0x35 0x63 0xBA 0x1A
27 0-7 0x36 0x62 0xB9 0x1B
28 0-7 0x37 0x61 0xB6 0x1C
29 0-7 0x3A 0x60 0xB5 0x1D
30 0-7 0x3C 0x5F 0xB4 0x1E
31 0-7 None None None None
Table 4–5: Current Private Loop Device Mapping (Continued)
Bus #
0
Target#
0-31
Lun#
0-7
*AL_PA
None
SEL_ID
None
**AL_PA
None
SEL_ID
None
*Use this translation if registry ScanDown = 0 (default).
**Use this translation if registry ScanDown = 1.
***If MapBus0= 1; then the device addressing starts with Bus#0, not Bus#1.