hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

fca2355 dual channel PCI host bus adapter installation guide 5–3
Diagnostic and Configuration Utilities
Using the DOS Diagnostic Utility for Preliminary Testing
The diagnostic program performs preliminary analysis of the HBA before displaying
the main menu. If no HBA is found, the program exits. Error messages are displayed
on failure conditions.
During startup, the diagnostic and firmware download utility program:
1. Looks for installed PCI HBAs.
2. Executes preliminary testing on all installed HBAs. Tests include:
a. SLIM memory test
b. BIU register test
c. BIU configuration registers test
3. Reports pass or fail status messages.
4. Resets the HBAs.
5. Checks Power-On Self Test (POST) status of HBAs.
6. Reports revision levels of diagnostic and functional firmware.
7. Displays the resources of each HBA.
The following is a sample output of the DOS Diagnostic Utility Start-Up Procedure.
***************************************************************
WARNING: This utility may not work with the Expanded Memory
Manager
(EMM386). Please read LP6DUTIL documentation for further
details.
***************************************************************
LP6000 Host Adapters found in the system: 1
PRELIMINARY TESTING of Host Adapter 1
Host Adapter 1: PASS 0xA: SLIM Memory Tests
Host Adapter 1: PASS 0xA: BIU Registers Tests
Host Adapter 1: PASS 0xA: BIU Configuration Registers Tests