hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

fca2355 dual channel PCI host bus adapter installation guide 5–11
Diagnostic and Configuration Utilities
Test Host Bus Adapters
Select this option to run host-based internal and external loopback tests on the HBAs.
From the LightPulse Utility/NT Main menu screen:
1. Select Test Host Bus Adapters.
2. Enable or disable the external loopback tests:
a. Enable the external loopback tests by selecting 1=Y. The default is disabled,
0=No. Internal BIU PCI loopback and other loopback tests are run
automatically.
b. Select 0=No if you do not have an external loopback connector.
NOTE: Testing the HBA while it is connected to an arbitrated loop is not recommended.
Modify Test Options
Use this option to specify the number of passes on one or more of these tests: PCI
loopback, internal loopback, external Loopback, or all three.
From the LightPulse Utility/NT Main menu screen:
1. Select Test.
2. Select the following data for the PCI loopback, Internal loopback, External
Loopback tests:
a. The number of passes. The default is 0x50. 0=infinity
b. The action to take upon encountering errors. Select one of the following:
— 0 = stop (default)
—1 = repeat
— 2 = ignore
Restart Host Bus Adapters
Select this option to reset the HBA. When a restart HBA occurs, the HBA performs
POST testing and reloads functional firmware.