HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)
2.9 NAME 73
FSE media pool assigned to the same FSE partition, if it exists. The recre-
ated data is created on the open or empty medium volumes in the FSE media
pool to which the damaged medium is assigned. If the – –no–monitor op-
tion is not specified, the progress of the maintenance job that performs the
recreation will be reported to the command output. For details of the redun-
dant copy recreation process, see the FSE user guide.
• –h, – –help
Print the usage information for this FSE command.
• –v, – –version
Print the copyright and version information for this FSE command.
2.9.4 EXAMPLES
• Add a new FSE medium with barcode backup_tape_05 to the FSE configu-
ration:
fsemedium – –add backup_tape_05
• Add a new FSE medium with barcode backup_tape_10 to the FSE configu-
ration and assign it to FSE media pool pool_bkp:
fsemedium –a backup_tape_10 ––pool pool_bkp
• Remove the FSE medium with barcode backup_tape_13 from the FSE con-
figuration:
fsemedium –r backup_tape_13
• Remove the FSE medium with barcode backup_tape_78 from the FSE con-
figuration; skip confirmation:
fsemedium –r backup_tape_78 –F
• List barcodes of the configured FSE media within the FSE implementation:
fsemedium – –list
• Show status of all medium volumes on the FSE medium with barcode
archive_tape_ABB:
fsemedium –l archive_tape_ABB –V
HP StorageWorks File System Extender Software CLI reference