FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-70
Enterprise Operating System Command Line Interface User Manual
config
Parameters This command has one parameter.
Command Examples
Root> config snmp authTraps enable
Root> config snmp authTraps 1
config.snmp.deleteCommunity
Syntax deleteCommunity commIndex
Purpose This command entirely deletes a community from the SNMP.
Parameters This command has one parameter.
Command Example
Root> config snmp deleteCommunity 5
config.snmp.setFaMibVersion
Syntax setFaMibVersion versionNumber
Purpose This command sets the version of the Fibre Alliance MIB with which
the SNMP agent interacts. The version number can be set to 3.0 or 3.1.
Parameters This command has one parameter.
Command Example
Root> config snmp setFaMibVersion 3.1
enabledState Specifies whether the authentication traps are
enabled. Valid values are enable and disable.
Boolean 1 and 0 may be substituted as values.
commIndex Specifies the community to be deleted. Valid
values are integers in the range 1–6. This value
was set in the commIndex parameter of the
config.snmp.addCommunity command. Valid
values are integers in the range 1–6.
versionNumber Sets the version of the Fibre Alliance MIB
version number. Accepted values for this
command are 3.0 or 3.1.