FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

Table Of Contents

Preface

This publication is part of the documentation suite that supports the

McDATA® Sphereon™ 3016 Fabric Switch, Sphereon 3032 Fabric

Switch, Sphereon 3216 Fabric Switch, Sphereon 3232 Fabric Switch,

Sphereon 4300 Fabric Switch, Sphereon 4500 Fabric Switch,

Intrepid

6064 Director, and Intrepid 6140 Director.

Who Should Use This

Manual

This publication describes the commands that can be entered through

the Command Line Interface (CLI) for the Intrepid

6064 Director,

and Intrepid 6140 Director, Sphereon™ 3016 Switch, Sphereon 3032

Switch, Sphereon 3216 Switch, Sphereon 3232 Switch, Sphereon 4300

Switch, and Sphereon 4500 Switch. (A limited number of these

commands are available on the ED-5000 Director.) Access through a

Telnet client is presumed.

This publication is intended for data center administrators and

customer support personnel, who can either enter the commands

manually or write a script containing them. However, the primary

purpose of the Command Line Interface is for scripts written by these

administrators and personnel for use in a host-based scripting

environment. Therefore, this publication presumes that the user is

familiar with:

• Establishing and using a Telnet session

• Using the command line of a terminal

• Writing scripts

• Networking, SAN, and zoning concepts

• McDATA products in the user’s network