FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)
Table Of Contents
- Contents
- Preface
- Introduction
- CLI Commands
- Command Overview
- New and Changed Commands
- config
- config.enterpriseFabMode.setState
- config.features.enterpriseFabMode
- config.features.ficonMS
- config.features.installKey
- config.features.NPIV
- config.features.openSysMS
- config.features.openTrunking
- config.features.show
- config.fencing.addPolicy
- config.fencing.addPort
- config.fencing.deletePolicy
- config.fencing.removePort
- config.fencing.setParams
- config.fencing.setState
- config.fencing.show
- config.fencing.showTypeTable
- config.ficonCUPZoning.addControlHost
- config.ficonCUPZoning.deleteControlHost
- config.ficonCUPZoning.setState
- config.ficonCUPZoning.show
- config.ficonMS.setMIHPTO
- config.ficonMS.setState
- config.ficonMS.show
- config.ip.ethernet
- config.ip.lineSpeed
- config.ip.show
- config.NPIV.maxPortIDs
- config.NPIV.setState
- config.NPIV.show
- config.openSysMS.setHostCtrlState
- config.openSysMS.setState
- config.port.blocked
- config.port.fan
- config.port.name
- config.port.rxCredits
- config.port.show
- config.port.showPortAddr
- config.port.speed
- config.port.swapPortByAddr
- config.port.swapPortByNum
- config.port.type
- config.security
- config.security.authentication.interface api.outgoing
- config.security.authentication.interface.api.sequence
- config.security.authentication.interface.cli.sequence
- config.security.authentication.interface.eport.outgoing
- config.security.authentication.interface.eport.sequence
- config.security.authentication.interface.nport.outgoing
- config.security.authentication.interface.nport.sequence
- config.security.authentication.interface.osms.outgoing
- config.security.authentication.interface.osms.setKey
- config.security.authentication.interface.serial.enhancedAuth
- config.security.authentication.interface.show
- config.security.authentication.interface.web.sequence
- config.security.authentication.port.override
- config.security.authentication.port.show
- config.security.authentication.RADIUS.attempts
- config.security.authentication.RADIUS.deadtime
- config.security.authentication.RADIUS.deleteServer
- config.security.authentication.RADIUS.server
- config.security.authentication.RADIUS.show
- config.security.authentication.RADIUS.timeout
- config.security.authentication.switch.setSecret
- config.security.authentication.user
- config.security.authentication.user.add
- config.security.authentication.user.delete
- config.security.authentication.user.modify
- config.security.authentication.user.role
- config.security.authentication.user.show
- config.security.fabricBinding
- config.security.fabricBinding.activatePending
- config.security.fabricbinding.addAttachedMembers
- config.security.fabricBinding.addMember
- config.security.fabricBinding.clearMemList
- config.security.fabricbinding.deactivateFabBind
- config.security.fabricBinding.deleteMember
- config.security.fabricBinding.replacePending
- config.security.fabricBinding.showActive
- config.security.fabricBinding.showPending
- config.security.portBinding
- config.security.portBinding.bound
- config.security.portBinding.show
- config.security.portBinding.wwn
- config.security.ssh.resetKeys
- config.security.ssh.setState
- config.security.ssh.show
- config.security.switchAcl
- config.security.switchAcl.addRange
- config.security.switchAcl.deleteRange
- config.security.switchAcl.setState
- config.security.switchAcl.show
- config.security.switchBinding
- config.security.switchBinding.addMember
- config.security.switchBinding.deleteMember
- config.security.switchBinding.setState
- config.security.switchBinding.show
- config.snmp.addCommunity
- config.snmp.authTraps
- config.snmp.deleteCommunity
- config.snmp.setFaMibVersion
- config.snmp.setState
- config.snmp.show
- config.switch
- config.switch.domainRSCN
- config.switch.edTOV
- config.switch.insistDomainId
- config.switch.interopMode
- config.switch.ltdFabRSCN
- config.switch.prefDomainId
- config.switch.priority
- config.switch.raTOV
- config.switch.rerouteDelay
- config.switch.speed
- config.switch.show
- config.switch.zoneFlexPars
- config.switch.zoningRSCN
- config.system.contact
- config.system.date
- config.system.description
- config.system.location
- config.system.name
- config.system.show
- config.zoning
- config.zoning.activateZoneSet
- config.zoning.addPortMem
- config.zoning.addWwnMem
- config.zoning.addZone
- config.zoning.clearZone
- config.zoning.clearZoneSet
- config.zoning.deactivateZoneSet
- config.zoning.deletePortMem
- config.zoning.deleteWwnMem
- config.zoning.deleteZone
- config.zoning.renameZone
- config.zoning.renameZoneSet
- config.zoning.replaceZoneSet
- config.zoning.setDefZoneState
- config.zoning.showActive
- config.zoning.showPending
- maint
- perf
- perf.class2
- perf.class3
- perf.clearStats
- perf.errors
- perf.link
- perf.openTrunking.backPressure
- perf.openTrunking.congestionThresh
- perf.openTrunking.lowBBCreditThresh
- perf.openTrunking.setState
- perf.openTrunking.show
- perf.openTrunking.unresCongestion
- perf.preferredPath
- perf.preferredPath.clearPath
- perf.preferredPath.setPath
- perf.preferredPath.setState
- perf.preferredPath.showPath
- perf.preferredPath.showState
- perf.thresholdAlerts
- perf.thresholdAlerts.counter.addAlert
- perf.thresholdAlerts.counter.addPort
- perf.thresholdAlerts.counter.removePort
- perf.thresholdAlerts.counter.setCounter
- perf.thresholdAlerts.counter.setParams
- perf.thresholdAlerts.counter.show
- perf.threshholdAlerts.counter.showStatisticTable
- perf.thresholdAlerts.deleteAlert
- perf.thresholdAlerts.setState
- perf.thresholdAlerts.show
- perf.thresholdAlerts.throughput.addAlert
- perf.thresholdAlerts.throughput.addPort
- perf.thresholdAlerts.throughput.removePort
- perf.thresholdAlerts.throughput.setUtilType
- perf.thresholdAlerts.throughput.setUtilPercentage
- perf.thresholdAlerts.throughput.setParams
- perf.thresholdAlerts.throughput.show
- perf.thresholdAlerts.throughput.showUtilTypeTable
- perf.traffic
- show
- show.all
- show.auditLog
- show.epFrameLog.config
- show.epFrameLog.filterClassFFrames
- show.epFrameLog.setFilterPort
- show.epFrameLog.noWrap
- show.epFrameLog.wrap
- show.eventLog
- show.fabricLog.noWrap
- show.fabricLog.wrap
- show.fabric.nodes
- show.fabric.principal
- show.fabric.topology
- show.features
- show.fencing.policies
- show.ficonCUPZoning
- show.ficonMS
- show.frus
- show.ip.ethernet
- show.linkIncidentLog
- show.loginServer
- show.nameServer
- show.nameServerExt
- show.NPIV.config
- show.openSysMS.config
- show.openTrunking.config
- show.openTrunking.rerouteLog
- show.port.config
- show.port.exit
- show.port.info
- show.port.nodes
- show.port.opticEDD
- show.port.opticInfo
- show.port.profile
- show.port.showPortAddr
- show.port.status
- show.port.technology
- show.preferredPath.showPath
- show.security.fabricBinding
- show.security.log
- show.security.portBinding
- show.security.switchAcl
- show.security.switchBinding
- show.snmp
- show.switch
- show.system
- show.thresholdAlerts.alerts
- show.thresholdAlerts.log
- show.zoning
- Error Messages
- Commands and Corresponding Releases
- Glossary
- Index
![](/manual/hp/hp-storageworks-ha-fabric-manager-upgrade/fw-070000hafm-sw-080600-mcdata-enterprise-operating-system-command-line-interface-user-manual-620-000134-720-april-2005/images/img-164.png)
2
2-120
Enterprise Operating System Command Line Interface User Manual
perf
Description of
Summed Sets
Some of the threshold alerts consist of groups of related items called
Summed Sets. When any of the items in the summed set are
encountered, the total value of the summed set counter is
incremented. The items that make up the summed sets are:
• Physical Link Errors Summed Set
• Link Failures
• Sync Losses
• Signal Losses
•Protocol Errors
•Invalid Tx Words
•CRC Errors
•Frames Too Short
•Delimiter Errors
• Link Sequence Counts Summed Set
• Link Resets Received
•Link Reset Sent
•OLS Received
•OLS Sent
• Logical Link Errors Summed Set
• Discarded Frames
• Address ID Errors
• Class 2 Busied Frames
• Class 2 Rejected Frames
• Class 3 Discarded Frames
perf.thresholdAlerts.counter.addAlert
Syntax addAlert name
Purpose This command configures a new counter threshold alert and assigns
it a name. The new alert is assigned default settings which can then
be changed using the other counter threshold alert commands.
The default settings for a new counter threshold alert are as follows:
•Ports: None
•Counter: None
• Increment: 100