FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-128
Enterprise Operating System Command Line Interface User Manual
perf
Purpose This command displays information about all threshold alerts.
Parameters This command has no parameters.
Command Example
Root> perf thresholdAlerts show
Output The data is displayed as a table that includes the following
properties:
Name The name of the threshold alert (truncated to 51
characters).
Type The trigger statistic or threshold type of the alert
(abbreviated to 17 chars).
Tx Util TTA - Transmit Utilization
Rx Util TTA - Receive Utilization
Tx/Rx Util TTA - Transmit or Receive
Utilization
Link Resets Sent CTA - Link Resets Sent
Link Resets
Received
CTA - Link Resets Received
OLS Sent CTA - OLS Sent
OLS Received CTA - OLS Received
Link Failures CTA - Link Failures
Sync Losses CTA - Sync Losses
Signal Losses CTA - Signal Losses
Protocol Errors CTA - Primitive Sequence
Errors/Protocol Errors
Invalid Tx Words CTA - Invalid Tx Words
CRC Errors CTA - CRC Errors
Discarded Frames CTA - Discarded Frames
Frames Too Short CTA - Frames Too Short
Delimiter Errors CTA - Delimiter Errors