FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-160
Enterprise Operating System Command Line Interface User Manual
show
NOTE: The command config.NPIV.show on page 2-23 has functionality that is
identical to this command.
Parameters This command has no parameters.
Command Example
Root> show NPIV config
Output This command displays the following NPIV configuration data:
Output Example
NPIV state: Enabled
Port Max Allowed NPIV Logins
---- -----------------------
110
2 10
310
40
50
7 130...
show.openSysMS.config
Syntax config
Purpose This command displays the Open System Management Server state
and the Open System Management Server Host Control State.
Parameters This command has no parameters.
Command Example
Root> show openSysMS config
NPIV state The current enabled/disabled state of the
NPIV feature.
Max Allowed
NPIV Login Table
A table mapping each port number on the
switch to a corresponding max number of
NPIV logins setting.