FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)
Table Of Contents
- Contents
- Preface
- Introduction
- CLI Commands
- Command Overview
- New and Changed Commands
- config
- config.enterpriseFabMode.setState
- config.features.enterpriseFabMode
- config.features.ficonMS
- config.features.installKey
- config.features.NPIV
- config.features.openSysMS
- config.features.openTrunking
- config.features.show
- config.fencing.addPolicy
- config.fencing.addPort
- config.fencing.deletePolicy
- config.fencing.removePort
- config.fencing.setParams
- config.fencing.setState
- config.fencing.show
- config.fencing.showTypeTable
- config.ficonCUPZoning.addControlHost
- config.ficonCUPZoning.deleteControlHost
- config.ficonCUPZoning.setState
- config.ficonCUPZoning.show
- config.ficonMS.setMIHPTO
- config.ficonMS.setState
- config.ficonMS.show
- config.ip.ethernet
- config.ip.lineSpeed
- config.ip.show
- config.NPIV.maxPortIDs
- config.NPIV.setState
- config.NPIV.show
- config.openSysMS.setHostCtrlState
- config.openSysMS.setState
- config.port.blocked
- config.port.fan
- config.port.name
- config.port.rxCredits
- config.port.show
- config.port.showPortAddr
- config.port.speed
- config.port.swapPortByAddr
- config.port.swapPortByNum
- config.port.type
- config.security
- config.security.authentication.interface api.outgoing
- config.security.authentication.interface.api.sequence
- config.security.authentication.interface.cli.sequence
- config.security.authentication.interface.eport.outgoing
- config.security.authentication.interface.eport.sequence
- config.security.authentication.interface.nport.outgoing
- config.security.authentication.interface.nport.sequence
- config.security.authentication.interface.osms.outgoing
- config.security.authentication.interface.osms.setKey
- config.security.authentication.interface.serial.enhancedAuth
- config.security.authentication.interface.show
- config.security.authentication.interface.web.sequence
- config.security.authentication.port.override
- config.security.authentication.port.show
- config.security.authentication.RADIUS.attempts
- config.security.authentication.RADIUS.deadtime
- config.security.authentication.RADIUS.deleteServer
- config.security.authentication.RADIUS.server
- config.security.authentication.RADIUS.show
- config.security.authentication.RADIUS.timeout
- config.security.authentication.switch.setSecret
- config.security.authentication.user
- config.security.authentication.user.add
- config.security.authentication.user.delete
- config.security.authentication.user.modify
- config.security.authentication.user.role
- config.security.authentication.user.show
- config.security.fabricBinding
- config.security.fabricBinding.activatePending
- config.security.fabricbinding.addAttachedMembers
- config.security.fabricBinding.addMember
- config.security.fabricBinding.clearMemList
- config.security.fabricbinding.deactivateFabBind
- config.security.fabricBinding.deleteMember
- config.security.fabricBinding.replacePending
- config.security.fabricBinding.showActive
- config.security.fabricBinding.showPending
- config.security.portBinding
- config.security.portBinding.bound
- config.security.portBinding.show
- config.security.portBinding.wwn
- config.security.ssh.resetKeys
- config.security.ssh.setState
- config.security.ssh.show
- config.security.switchAcl
- config.security.switchAcl.addRange
- config.security.switchAcl.deleteRange
- config.security.switchAcl.setState
- config.security.switchAcl.show
- config.security.switchBinding
- config.security.switchBinding.addMember
- config.security.switchBinding.deleteMember
- config.security.switchBinding.setState
- config.security.switchBinding.show
- config.snmp.addCommunity
- config.snmp.authTraps
- config.snmp.deleteCommunity
- config.snmp.setFaMibVersion
- config.snmp.setState
- config.snmp.show
- config.switch
- config.switch.domainRSCN
- config.switch.edTOV
- config.switch.insistDomainId
- config.switch.interopMode
- config.switch.ltdFabRSCN
- config.switch.prefDomainId
- config.switch.priority
- config.switch.raTOV
- config.switch.rerouteDelay
- config.switch.speed
- config.switch.show
- config.switch.zoneFlexPars
- config.switch.zoningRSCN
- config.system.contact
- config.system.date
- config.system.description
- config.system.location
- config.system.name
- config.system.show
- config.zoning
- config.zoning.activateZoneSet
- config.zoning.addPortMem
- config.zoning.addWwnMem
- config.zoning.addZone
- config.zoning.clearZone
- config.zoning.clearZoneSet
- config.zoning.deactivateZoneSet
- config.zoning.deletePortMem
- config.zoning.deleteWwnMem
- config.zoning.deleteZone
- config.zoning.renameZone
- config.zoning.renameZoneSet
- config.zoning.replaceZoneSet
- config.zoning.setDefZoneState
- config.zoning.showActive
- config.zoning.showPending
- maint
- perf
- perf.class2
- perf.class3
- perf.clearStats
- perf.errors
- perf.link
- perf.openTrunking.backPressure
- perf.openTrunking.congestionThresh
- perf.openTrunking.lowBBCreditThresh
- perf.openTrunking.setState
- perf.openTrunking.show
- perf.openTrunking.unresCongestion
- perf.preferredPath
- perf.preferredPath.clearPath
- perf.preferredPath.setPath
- perf.preferredPath.setState
- perf.preferredPath.showPath
- perf.preferredPath.showState
- perf.thresholdAlerts
- perf.thresholdAlerts.counter.addAlert
- perf.thresholdAlerts.counter.addPort
- perf.thresholdAlerts.counter.removePort
- perf.thresholdAlerts.counter.setCounter
- perf.thresholdAlerts.counter.setParams
- perf.thresholdAlerts.counter.show
- perf.threshholdAlerts.counter.showStatisticTable
- perf.thresholdAlerts.deleteAlert
- perf.thresholdAlerts.setState
- perf.thresholdAlerts.show
- perf.thresholdAlerts.throughput.addAlert
- perf.thresholdAlerts.throughput.addPort
- perf.thresholdAlerts.throughput.removePort
- perf.thresholdAlerts.throughput.setUtilType
- perf.thresholdAlerts.throughput.setUtilPercentage
- perf.thresholdAlerts.throughput.setParams
- perf.thresholdAlerts.throughput.show
- perf.thresholdAlerts.throughput.showUtilTypeTable
- perf.traffic
- show
- show.all
- show.auditLog
- show.epFrameLog.config
- show.epFrameLog.filterClassFFrames
- show.epFrameLog.setFilterPort
- show.epFrameLog.noWrap
- show.epFrameLog.wrap
- show.eventLog
- show.fabricLog.noWrap
- show.fabricLog.wrap
- show.fabric.nodes
- show.fabric.principal
- show.fabric.topology
- show.features
- show.fencing.policies
- show.ficonCUPZoning
- show.ficonMS
- show.frus
- show.ip.ethernet
- show.linkIncidentLog
- show.loginServer
- show.nameServer
- show.nameServerExt
- show.NPIV.config
- show.openSysMS.config
- show.openTrunking.config
- show.openTrunking.rerouteLog
- show.port.config
- show.port.exit
- show.port.info
- show.port.nodes
- show.port.opticEDD
- show.port.opticInfo
- show.port.profile
- show.port.showPortAddr
- show.port.status
- show.port.technology
- show.preferredPath.showPath
- show.security.fabricBinding
- show.security.log
- show.security.portBinding
- show.security.switchAcl
- show.security.switchBinding
- show.snmp
- show.switch
- show.system
- show.thresholdAlerts.alerts
- show.thresholdAlerts.log
- show.zoning
- Error Messages
- Commands and Corresponding Releases
- Glossary
- Index
Introduction
1-1
1
Introduction
This chapter introduces the Command Line Interface (CLI) and
describes the essentials for using the CLI commands.
• Command Line Interface Overview......................................................1-2
• Entering Command Line Interface Commands....................................1-3
• Logging In and Logging Out..............................................................1-14
• Using the commaDelim Command ....................................................1-17
• Handling Command Line Interface Errors.........................................1-18
• Using the Command Line Interface Help...........................................1-19
• Commenting Scripts...........................................................................1-20
• ED-5000 Director...............................................................................1-21
• Telnet Session......................................................................................1-22
• Backup and Restoration......................................................................1-23