FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-181
show
show.security.log
Syntax log [clear]
Purpose This command shows the contents of the security log as maintained
in NV-RAM on the director or switch.
Parameters This command has one parameter.
Command Example
Root> show security log
Output The security log data are displayed as a table that includes the
following properties.
Output Example The output from the show.security.log command displays as follows.
Reason Date/Time Trigger Level Category Count
------ --------------- --------------- ---------------------- -----
10000 04/12/01 10:58A Informational Successful Connection 375
Desc: EWS User Connected
clear This optional parameter causes all security log
entries to be cleared.
Reason The reason code for the security event.
Date/Time The date and time when the event occurred.
Trigger Level The trigger level of the event. Possible values
may be: Informational, Security Change, or
Error.
Category The event category message. Possible values
may be: Successful Connection, Disconnection,
Configuration Change, Authorization Failure,
Authentication Failure, or Reserved.
Count A cumulative count of events within a known
period.
Desc A formatted string containing a description of
the event.
Data A formatted string containing additional or
event-specific data.