FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-184
Enterprise Operating System Command Line Interface User Manual
show
show.security.switchBinding
Syntax switchBinding
Purpose This command displays the switch binding configuration.
Parameters This command has no parameters.
Command Example
Root> show security switchBinding
Output The switch binding configuration data is displayed as a table that
includes the following properties.
Output Example The output from the show.security.switchBinding command displays
as follows.
Switch Binding State: Enabled and Restricting E Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
Switch Binding
State
The switch binding state, which can have the
following values:
Disabled
Enabled and Restricting F_Ports
Enabled and Restricting E_Ports
Enabled and Restricting All Ports
Switch Binding
Membership List
The WWNs of the members of the active SBML.