FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-189
show
Output Example The output from the show.system command displays as follows.
System Information
Name: Joe's Switch
Description: McDATA ED-6064 Fibre Channel Director
Contact: Joe
Location: Everywhere
Date/Time: 04/16/2001 10:34:01AM
Serial Number: 82420481
Type Number: 006064
Model Name: ED-6064
Model Number: 001
EC Level: 1011231
Firmware Version: 04.01.00 Build 23
Beaconing: Disabled
show.thresholdAlerts.alerts
Location The system description as set in the
config.system.description command. For more
information, see config.system.location on
page 2-83.
Serial Number The serial number for the system.
Type Number The type number for the system.
Model Name The model name for the system (for example,
Sphereon 4500).
Model Number The model number for the system. All products
have the model number 001, except 1 Gb sheet
metal units, which are 002.
EC Level The engineering change level installed.
Firmware
Versio n
The current firmware version installed.
Beaconing The enabled state of unit beaconing (enabled or
disabled) as set in the maint.system.beacon
command.
Date/Time The system date and time as set in the
config.system.date command. For more
information, see config.system.date on page 2-82.