FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-4
Enterprise Operating System Command Line Interface User Manual
Message Error 020: Invalid Preferred Domain ID
Description The value entered for the preferred domain ID for the director or
switch is invalid.
Action The preferred domain ID must be an integer in the range 1–31. Enter
an appropriate value and re-submit.
Message Error 021: Invalid Switch Priority
Description The value entered for the switch priority is invalid.
Action The switch priority entered for the director or switch must be one of
the following: principal, neverprincipal, or default. Enter an
appropriate value and re-submit. (Refer to the description of the
command in config.switch.priority on page 2-75.)
Message Error 029: Invalid Gateway Address
Description The value entered for the gateway address is invalid.
Action The new gateway address for the Ethernet interface must be entered
in dotted decimal format (e.g. 0.0.0.0). Enter an appropriate gateway
address and re-submit.
Message Error 030: Invalid IP Address
Description The value entered for the IP Address is invalid.
Action The new IP address for the Ethernet interface must be entered in
dotted decimal format (e.g. 10.0.0.0). Enter an appropriate IP address
and re-submit.
Message Error 031: Invalid Subnet Mask
Description The value entered for the subnet mask is invalid.
Action The new subnet mask for the Ethernet interface must be entered in
dotted decimal format (e.g. 255.0.0.0). Enter an appropriate subnet
mask and re-submit.