FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
Error Messages
A-9
config.zoning.renameZoneSet on page 2-91. Make the appropriate
changes to the zone name and re-submit.
Message Error 057: Duplicate Zone
Description Two or more zone names in the zone set are identical.
Action All zone names must be unique. Make the appropriate changes and
re-submit.
Message Error 059: Zone Name in Use
Description Two or more zone names in the zone set are identical.
Action All zone names must be unique. Make the appropriate changes and
re-submit.
Message Error 060: Invalid Number of Zone Members
Description The entered command tried to add more zone members than the zone
can hold.
Action Reduce the number of zone members in the zone and re-submit the
command.
Message Error 061: Invalid Zone Member Type
Description A zone member was entered that is neither a WWN nor a Domain,
Port pair.
Action Zone members must be expressed in WWN format or as a Domain,
Port pair. Make the appropriate changes and re-submit. For more
information, see config.zoning.clearZone on page 2-88 and
config.zoning.addPortMem on page 2-86.