FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

Table Of Contents
i-7
Index
Index
access control list 2-64
all 2-138
ethernet attributes 2-154
event log 2-144
fabric binding 2-180
fabric nodes 2-148
fabric topology 2-149
features list 2-150
fencing policies 2-150
FICON CUP zoning 2-152
FICON MS 2-152
FRU information 2-153
link incident log 2-154
login server 2-155
name server 2-156
open trunking configuration 2-161
OpenTrunking
configuration 2-161
rerouteLog 2-162
OpenTrunking information 2-108
port address 2-173
port binding for all ports 2-182
port configuration 2-163, 2-171
port exit 2-164
port information 2-166
port nodes 2-167
port optic 2-170
port optical diagnostics 2-169
port status 2-174
port technology information 2-177
preferred path 2-178
preferred path exit port 2-164
security log 2-181
switch access control list 2-183
switch attributes 2-186
switch binding 2-184
Switch Binding Membership List 2-68
system attributes 2-188
threshold alert list 2-189
threshold alert log 2-192
threshold alert settings 2-135
WWN 2-148
show commands
active zoning configuration 2-92
all 2-138
configuration for port 2-27
features 2-9
order of output 1-11
pending zoning configuration 2-93
port
show binding 2-58
show branch 2-138
SNMP configuration
config.snmp.show 2-71
snmp.show 2-185
switch configuration 2-78
system configuration 2-83
SNMP
authorization traps 2-69
community
adding 2-68
deleting 2-70
disable agent 2-71
enable agent 2-71
Fibre Alliance MIB version 2-70
set state 2-71
spaces, quotation marks required 1-14
speeds
port 2-29
switches 2-78
state
back pressure 2-105
OpenTrunking 2-8, 2-107
setting NPIV 2-23
SNMP 2-71
Zone Flex Pars 2-80
zoning RSCN 2-81
statistic table, threshold alert 2-126
statistics, port, clearing 2-102
strings, null 1-14
strings, quotation marks in 1-14
subnet mask 2-21
summed sets 2-120
swap ports
by address 2-30
by number 2-30
switch attributes, displaying 2-186
Switch Binding
add SBML member 2-65
configuration 2-64
delete SBML member 2-66
show configuration 2-67
switch binding 2-184
adding member 2-65