FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

1
1-16
Enterprise Operating System Command Line Interface User Manual
Logging In and Logging Out
enters the default password when prompted to change the password,
the data portion of the security log entry for CLI login includes
“password not changed.”
A user name and password can be set by the administrator through
the config.security.authentication.user.add command or through the
config.security.authentication.user.modify command.
The access rights chosen for the CLI are completely independent of
the other product interfaces, for example, SNMP or McDATA product
interfaces.
Parameters This command has no parameters.
Command Examples
login
Username: Administrator
Password: password
login
Username: Operator
Password: password
logout
Syntax logout
Purpose This command allows a Telnet client to disconnect from the switch.
Description This command logs out the single Telnet client connected to the
switch. This command can be entered at any point in the command
tree.
Parameters This command has no parameters.
Command Examples
Root> logout
Config> logout
Config.Port> logout