FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-41
config
Parameters This command has one required parameter, and one optional
parameter:
Command Example
Root> config security authentication port override 138
enable
config.security.authentication.port.show
Syntax show
Purpose This command displays a table displaying the outgoing override
state for each port.
Parameters This command has no parameters.
Command Example
Root> config security authentication port show
Output This command displays all valid user names in the local database for
the specified interface.
Output Example The output for the config.security.authentication.port.show
command displays as follows:
portNumber Specifies the port number. Valid values
are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
overrideState This parameter sets the outgoing
authentication state for the specified port.
Valid values are enable, disable, or default.
Boolean 1 and 0 values may also be
substituted.
Port The port number.
Override State The outgoing authentication override
state.