FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-47
config
NOTE: Currently the only possible combination of multiple interfaces
is (Web and CLI).
Command Example
Root> config security authentication user add
01:2A:3f:4:5:0:0 eport
config.security.authentication.user.delete
Syntax delete username
username The new user name that will be added to
the local authentication database. If the
entered user name already exists in the
user database, an error will be shown.
This parameter can be from 1-23
characters in length for an API, Web or
CLI username. E Port and N Port
usernames must be entered as a standard
colon delimited WWN. All characters in
the printable USASCII character set are
valid with the exception of spaces, single
quotes, and double quotes.
interfaces This is a list of interfaces that will be
assigned to the associated username.
Accepted values for this parameter are:
cli
web
api
eport
nport
password Sets the password for the new login
username. This parameter can be from
1-24 characters in length for a Web or CLI
password. CHAP secrets and FCCT keys
must be exactly 16 bytes long for API,
OSMS, E Port, and N Port interfaces. This
parameter will not be echoed to the
screen. See Passwords and Secrets on
page 1-14 for valid characters.