HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
100 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Clears an invalid cache error and allows the controller and cache to resume
operation. If the error is due to a mirrored cache configuration that is incorrect, the
controller indicates Mirrored mode status after the error is cleared.
Use this command for the following situations:
■ If the controller or cache modules are replaced resulting in mismatched data
between the controllers.
■ If the controller or cache module is replaced while data is still in cache and
not properly flushed with the SHUTDOWN controller, SET
NOFAILOVER, or SET NOMULTIBUS_FAILOVER command first.
Syntax
CLEAR_ERRORS controller INVALID_CACHE
data-retention-policy
Parameters
The following parameters are required for the CLEAR_ERRORS
INVALID_CACHE command:
■ controller
■ data-retention-policy
These parameters are described in the following paragraphs.
controller
Identifies which controller is to receive the CLEAR_ERRORS
INVALID_CACHE command. You must specify THIS_CONTROLLER (the
one connected to the CLI maintenance terminal) or OTHER_CONTROLLER.
CLEAR_ERRORS controller INVALID_CACHE