HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
210 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Table 7 lists the valid EMU set point temperatures in both Celsius and
Fahrenheit.
If any of the setpoints assigned to a secondary EMU do not match the
corresponding setpoints assigned to the primary EMU, the secondary EMU
settings change to match the corresponding primary EMU settings.
Refer to the enclosure documentation for detailed information about setting
the EMU temperature set points.
Examples
This example shows how to set EMU sensor number 2 to 34°C:
SET EMU SENSOR_2_SETPOINT=34
This example shows how to set the EMU fan to operate at high speed:
SET EMU FANSPEED=HIGH
Table 7: EMU Setpoint Temperatures
ºC ºF ºC ºF ºC ºF ºC ºF ºC ºF
0 3210502068308640104
1 3411522170318841106
2 4612542272329042108
3 3713552373339143109
4 3914572475349344111
5 4115592577359545113
6 4316612679369746115
7 4517632781379947117
8 46186428823810048118
9 48196629843910249120