HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

211HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

Provides the capability to define a subset of host connections that have

management rights. A manager is a host connection that is allowed to issue CLI

commands through a LUN. By default all host connections are enabled as

managers. This command has no effect on CLI commands issued through the

maintenance port of the HSG80 array controller.

Note: This command has no effect on I/O operations. It only affects the ability of the

host to issue CLI commands to the controller.

Syntax

SET ENABLE_MANAGERS=ALL

SET ENABLE_MANAGERS=connection-names

Parameters

There are no parameters associated with this command.

Switches

There are no switches associated with this command.

Examples

To accept only control commands from host connections !NEWCON00 and

!NEWCON01, enter:

SET ENABLE_MANAGERS=!NEWCON00,!NEWCON01