HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
235HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Changes the characteristics of the specified logical unit.
Syntax
SET unit-number
Parameters
The following parameter is associated with the SET command:
unit-number
Specifies the logical unit number to modify. The unit-number is the
name given to the unit at the time it was created using the ADD UNITS
command.
Switches
Table 8 lists all switches for the SET unit-number command and shows which
switches can be used with each type of device and storageset. Descriptions of the
switches follow the table.
SET unit-number
Table 8: SET unit-number Switches for Existing Containers
Switch
Container Type
RAIDset
Stripeset
Mirrorset
N0Transportable Disk
Transportable Disk
ENABLE_ACCESS_PATH
DISABLE_ACCESS_PATH
✓✓✓✓✓
FAKE_PR
✓✓✓✓✓
IDENTIFIER
NOIDENTIFIER
✓✓✓✓