HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
292 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Displays information on all remote copy sets known to the subsystem.
Syntax
SHOW REMOTE_COPY_SETS
Parameters
There are no parameters associated with this command.
Switches
The following switch supports the SHOW REMOTE_COPY_SETS command:
FULL
Provides additional details regarding remote copy sets.
Example
Figure 26: Screen display after issuing the SHOW REMOTE_COPY_SETS command
See Also
ADD ASSOCIATIONS
ADD REMOTE_COPY_SETS
DELETE remote-copy-set-name
SHOW REMOTE_COPY_SETS
INT_TOP> show remote_copy_sets
Name Uses Used by
------------------------------------------------------------------
RCS1 remote copy D1 A1
RCS2 remote copy D2 A1
RCS3 remote copy D3 A1
RCS4 remote copy D4 A1