HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)
117HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide
4
Installing and Configuring the
HSG Agent
StorageWorks Command Console (SWCC) enables real-time configuration of the
storage environment and permits you to monitor and configure the storage
connected to the HSG80 controller.
The following information is included in this chapter:
■ Why Use StorageWorks Command Console (SWCC)?, page 118
■ Installation and Configuration Overview, page 119
■ About the Network Connection for the Agent, page 120
■ Before Installing the Agent, page 122
■ SWCC Features and Components, page 118
■ Configuring the Agent, page 123
■ RAID Manager Mail Messages, page 127
Note: For information on how to install the solution software packages, see Chapter
3, "Preparing the Host System".
Refer to Chapter 5 for a description of how to configure a subsystem that uses
Fibre Channel fabric topology.