HP StorageWorks HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide (AA-RV1HA-TE, March 2005)

Preparing the Host System
118 HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide
Here you are given the opportunity to start the SWCC Agent. If you do not want
to start the SWCC Agent, then you can start it later using the
/usr/stgwks2/config.sh script or SMIT (Applications->Compaq SWCC
Agent Configuration).
Would you like to execute the Agent now? [Y,n]
The STEAM agent has been started. The configuration process is
complete.
-- Hit RETURN to continue --
The final part of the installation is the installation of the HSG80 Snapshot fileset.
This allows you to create a Snapshot on the HSG80 of a particular disk in the OS.
You must have the “S” variant of the V8.8-1 firmware to use this feature. A
description of how to create Snapshots is included later in this document. The
name of this fileset is hsg_snapshot.rte.
HSG80 Snapshots
----------------------------------------
HSG80 Snapshots allow you to make snapshots of specific disks on
a RA8000, MA8000, or EMA12000
Would you like to install the HSG80 snapshot fileset? (Y/n)
Installing HSG80 Snapshot fileset...OK
At this point the installation is complete. The last line states that you can uninstall
the solution software by using the
cpq_hsg_uninstall command or using the
UNINSTALL command in the installation directory.
The solution software can be uninstalled anytime by issuing the
cpq_hsg_uninstall command or running the UNINSTALL command in
the installation directory
Installation Complete.
Upgrading Solution Software
To upgrade the Solution Software:
■ Upgrade the Cambex adapter driver.
■ Upgrade the HSG60 and/or HSG80 ODM entries.
■ Upgrade the build of the SWCC Agent.