HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Installing and Configuring the HSG Agent
143HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Downloading the Host Kit Software From the Web
The host kit software is available for download. You can save the software to your
computer or create a CD-ROM. Platform kit software is stored on the download
web site based on operating system. Follow the steps below to obtain the software
from the web site.
1. Go to
http://h18006.www1.hp.com/products/storageworks/ma8kema12k/kits.html .
2. Select the kit for download.
3. Select the folder in which you want to save the file when presented with the
Save As dialog box.
Note: The folder you select must be large enough to store the OS kit selected. File sizes
range from 862KB to 51 MB depending on the operating system selected.
The platform kit software is available as an .iso or .zip file. After you download it
to your computer, your options are:
■ Create a CD-ROM using the .iso file.
■ Copy the .zip file to the server that runs the platform kit software.
Uncompress the file and run the install program on the server.
Installing and Configuring the Agent
The Command Console Agent software is installed on your host system from the
StorageWorks Command Console CD-ROM.
1. Insert the Solution Software CD-ROM into the host system. A menu appears
on your screen.
Note: If the program does not start after inserting the CD-ROM, go to the CD-ROM
drive directory and click launch.exe.
2. The installation program provides one primary option: Solution Software for
Windows NT/2000/Server 2003 (32-bit). If you are just installing SWCC, skip
the driver upgrade screen. Select SWCC to install.