HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for OpenVMS Release Notes (AA-RV1QA-TE, March 2005)

Hardware and Software Support
31HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
OpenVMS Release Notes
Notes
■ In addition to any applicable or prerequisite TIMA kits used in your
configuration, the following FC-SCSI based TIMA kits (or later version) are
required.
— When using HSG80 array controllers in conjunction with OpenVMS
V7.3-2:
DEC-AXPVMS-VMS732_FIBRE_SCSI-V0300
Table 6: Minimum System Requirements
Component Requirement
Controller
Compatibility
StorageWorks HSG80 Array Controller, ACS V8.8-1 (or a
subsequently patched version of ACS V8.8-1)
Platform Alpha Servers 800, 1000A, 1200, 4000, 4100, 8200, 8400,
DS10, DS10L, DS15, DS20, DS20E, DS25, ES40, ES45, ES47,
ES80, GS60, GS60E, GS80, GS140, GS160, GS320, GS1280
Operating
System
HP OpenVMS V7.3-2, V7.3-1, 7.2-2
Topology Fibre Channel Switched (FC-SW)
SCSI Protocol SCSI-3
Failover Mode Multi-Bus (built into OS)
Host Mode VMS
Disk Space 3 MB
Adapter
Compatibility
HP StorageWorks DS-KGPSA-CA 1 Gb, 64-bit/33MHz PCI FC
HBA, HBA driver included with OS, Firmware 3.92a2
HP StorageWorks DS-KGPSA-DA 2 Gb, 64-bit/66MHz PCI FC
HBA, HBA driver included with OS, Firmware 3.92a2
HP StorageWorks DS-KGPSA-EA 2Gb, 64-bit/133MHz PCI-X,
HBA driver included with OS, Firmware 1.81a5
HP StorageWorks DS-A5132-AA 2Gb, 64-bit/133MHz PCI-X,
HBA driver included with OS, Firmware 1.81a5
HP StorageWorks DS-A5134-AA 2Gb, 64-bit/133MHz PCI-X
Dual, HBA driver included with OS, Firmware 1.81a5