HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for OpenVMS Release Notes (AA-RV1QA-TE, March 2005)

Host Operating System Notes
34 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
OpenVMS Release Notes
In cases where ACS functional builds other than V8.8-1F are required, ensure that
all necessary components for those configurations are at the proper level prior to
upgrading your ACS code.
More information and specific product documentation on storage management
software is available at the HP StorageWorks website:
http://h18006.www1.hp.com/storage/software.html
Host Operating System Notes
The following section lists host-specific operating notes.
Host Operating System Support of Multi-Bus Failover
OpenVMS has multi-bus failover support built into the operating system, which
takes advantage of the array controller’s ability to support multi-bus failover.
Limits on Adding Subsystems with SWCC_CONFIG
When running SWCC_CONFIG and adding a subsystem that has more than 9
connections associated with it, the following DCL error will be generated:
%DCL-W-TKNOVF, command element is too long - shorten
This operating constraint can be avoided by zoning the switch. Refer to the
documentation that came with your switch products.
HP OpenView Storage Virtual Replicator V3.0A V8.8-1F
HP SANworks Network View V2.0B V8.8-1F/G/S/P
HP SANworks Storage Allocation
Reporter
V1.0D V8.8-1F
Table 7: Layered Application Compatibility
Application Application version
Supported ACS
versions and
variants