HP StorageWorks 1000/1500 Modular Smart Array firmware updating guide (370881-002, June 2007)

3Updatingthecomponents
Perform the following procedures, as needed, to update system components:
• Updating the operating system
• Updating switch firmware
• Updating HBA firmware
• Updating SCSI ha rd drive firmware
• Updating multipathing software
• Updating HBA drivers, MPIO components, and the ACU
• Updating MSA controller firmware
Updating the operating system
Obtain the ne ede d files and installation instructions from the operating system vendor website or the
HP IT Resource Center website: h
ttp://www.itrc.hp.com.
CAUTION:
Operating system updates require one or more system restarts and should be performed during
scheduled m
aintenance time.
Updating switch firmware
Obtain the needed files and installation instructions from the switch vendor or HP SAN Infrastructure
website:h
ttp://www.hp.com/go/san.
Updating HBA firm w are
Obtain the nee ded files and installation instructions from the HP SAN Infrastructure website:
h
ttp://www.hp.com/go/san.
NOTE:
SpecificversionsofHBAfirmware and HBA drivers are designed to work together . For more information,
see Determining which components to update and the MSA-specific compatibility guide on the Technical
Documentation page of each MSA website.
Updatin
gSCSIharddrivefirmwar e
SCSI har
ddrivefirmware updates are performed from the bootable ProLiant Firmware Maintenance CD
and are required only when the following message is displayed on the MSA controller LCD pa nel:
85 BAD DRIVE FRMWARE BOX <n> BAY <n>
CAUTION
:
This upd
ate procedure must be performed during a scheduled maintenance window.
1000/1500 Modular Smart Array firmware updating guide
15