HP StorageWorks 1000/1500 Modular Smart Array firmware updating guide (370881-002, June 2007)

1. Ob tain the ISO image for the ProLiant Firmware Maintenance CD from the following website:
h
ttp://www.hp.com/support/ proliantstorage. Then, burn the image onto a bootable C D using a
standard CD-ROM burning utility. Do not simply copy the ISO file to a blank CD.
NOTE:
If the latest Firmware Maintenance CD does not include the latest-release drive firmware contained in
a Smart Component, the CD can be used in combination with the latest individual Smart Component
package to perform the update.
2. InserttheCDintotheCD-ROMdriveoftheserver.
3. Following standard precautions, remove p ower from a ProLiant server with access to the MSA.
4. Reapply power to the server.
5. Allow the server to boot to the Firmware Maintenance CD, and then follow the onscreen instructions
to upgrade the firmware on the hard drives.
Updating multipathing software
NOTE:
Multipathing functionality for OpenVMS and Tru64 UNIX is included in the Operating System. No
special multipathing update procedures are required.
Go to one of the following appropriate website for the needed files and installation instructions.
Tab l e 4 Multipathing websites
Multipathing
tool
Operating
system
Website
HP Secure Pa th
Windows
Linux
NetWare
HP-UX
Secure Path link on the Software, firmware & drivers page:
MSA1000: h
ttp://www.hp.com/go/msa1000
MSA1500: http : //www.hp.com/go/msa1500cs
Secure Path website: http://www.hp.com/go/securepath
HP MPIO
Windows
MPIO link on the Software, firmware & drivers page:
MSA1000: h
ttp://www.hp.com/go/msa1000
MSA1500: http : //www.hp.com/go/msa1500cs
QLogic HBA
failover
driver
Linux
Host Bus Ad
apters l ink on the Software, firmware & drivers page:
MSA1000: h
ttp://www.hp.com/go/msa1000
MSA1500: h
ttp://www.hp.com/go/msa1500cs
16
Updating the components