HP StorageWorks 1000/1500 Modular Smart Array firmware updating guide (370881-002, June 2007)

NOTE:

Your menu may differ slightly from the following example.

5. Click View Contents to review notes and information about the contents of the CD.

IMPORTANT:

• Install the HBA driv er before the Windows Event Notiﬁcation Service.

• As a time-saving measure when installing multiple components from the CD, do

not restart the server each time when prompted. Instead, restart the server after all

components are installed.

6. Update each item, as needed, following the onscreen instructions

7. When ﬁnished, click Exit, remove the CD from the CD-ROM drive, and then restart the server.

8. Repeat these installation procedures on each ser ver with access to the MSA.

Using the Support Software C D (Linux)

1. With the HBAs installed in the server, apply power, start your Linux operating system, and log on

as the root user.

IMPORTANT:

IfLUNsontheMSAarealreadybeingpresentedtotheserver,disconnecttheMSAfromthe

StorageAreaNetwork(SAN).IftheMSAisunconﬁgured,theMSAcanbeconnectedto

the S

AN.

2. Insert the MSA Support Software CD into the C D-ROM drive of the server, and then mount the

CD-ROM.

Updating the components