HP StorageWorks 1000/1500 Modular Smart Array firmware updating guide (370881-002, June 2007)

5. In the Send File window:
a. Click Browse, n avigate to the directory in which you placed the firmware files, and then select
the firmware file.
b. Expand the Protocol drop-down b ox, and then select 1K Xmodem.
c. Click Send.
A 1K Xmodem status window is displayed.
NOTE:
TheMSAcontrollerdisplaysthemessageFIRMWARE FLASH STARTED when it starts the
download, and FIRMWARE FLASH DONE when the download is complete.
6. Wait for a completion message to be displayed.
7. Restart the MSA by pressing and releasing the power/standby button on the front of the MSA.
NOTE:
TheMSAstoragesystemmustberestartedtoactivateanynewfirmware.
a. Press and
hold down the MSA Power on/Standby b utton for approximately five seconds to
place the MSA in Standby mode.
b. Power off all storage enclosures attached to the MSA.
c. Wait app
roximately two minutes to ensure that the hard disk drives in the enclosures stop
rotating.
d. Restart all storage enclosures attached to the MSA.
e. Wait ap
proximately four minutes to allow the enclosures to complete their startup routines.
f. Press and release the MSA Power on/Standby button to restart the MSA.
g. Wait (up to eight minutes) for the STARTUP COMPLETE message to display on the MSA
contro
ller LCD panel.
36
Updating the components