HP StorageWorks 1000/1500 Modular Smart Array firmware updating guide (370881-002, June 2007)

NOTE:

In dual-controller conﬁgurations, ﬁrmware on the two contr ollers is compared each time

the MSA chassis is restarted. If the versions are mismatched, the system prompts to clone

the ﬁrm ware on the controller with the latest version over to the controller with the earlier

version ﬁrmware. The following message is displayed on the LCD panel of the controller

with the earlier ﬁrmware:

07 CLONE FIRMWARE ? ‘<‘ = NO, ‘>’ = YES

Press the > button on the LCD panel to clone the ﬁrmware. During the cloning process,

informational messages are displayed on the controller LCD panels. When the cloning

process is complete, the just-updated controller automatically restarts.

8. Before resuming I/O ac cess to the MSA, verify that the MSA and its storage arrays are online.

1000/1500 Modular Smart Array ﬁrmware updating guide