HP StorageWorks 1000/1500 Modular Smart Array Firmware Updating Guide (370881-001, May 2006)

NOTE:

Yourmenumaydifferslightlyfromthefollowingexample.

5. Click View Con tents to review notes and information about the contents of the CD.

IMPORTANT:

• Install the HBA driver before the Windows Event Notiﬁcation Service.

• As a time-saving measure when installing multiple components from the CD, do

not restart the server each time when prompted. Instead, restart the server after all

components are installed.

6. Up date each item, as needed, following the onscreen instructions

7. When ﬁnished, click Exit, remove the CD from the C D-ROM drive, and then restart the server.

8. Repeat these installation procedures on each server with access to the MSA.

Using the Support Software CD (Linux)

1. With the HBAs installed in the server, apply power, start your Linux operating system, and log on

astherootuser.

IMPORTANT:

If LUNs on the MSA are already being presented to the server, disconnect the MSA fr om

the Storage Area Network (SAN). If the MSA is unconﬁgured,theMSAcanbeconnected

to the

SAN.

2. Insert the MSA Support Software CD into the C D-ROM drive of the server, and then mount the

CD-ROM.

3. Browse the contents of the CD to locate and read the readme.txt ﬁle, which includes notes and

information about the CD.

4. To update the HBA driver:

Updating the components