HP Array Configuration Utility User Guide (416146-001, January 2006)

Modifying an existing configuration 27
NOTE: Be sure that every HBA in the system has access to the logical drives for which multi-path will be
used.
5. Click Finish.
MSA and Smart Array Cluster storage controllers
1. Click Selective Storage Presentation, and then click Begin.
On the next screen that appears, select the appropriate radio button to enable or disable SSP, and
then click Next.
• If you disable SSP, all host controllers have access to all logical drives.
• If you enable SSP, you can decide which hosts are to have access to which logical drives.
If you select Enable, the screen lists all identified host controllers.
2. Select the host controllers that are to have access to each logical drive, define the host mode for
each controller, rename the connections if necessary, and then click Next.
NOTE: Be sure that every HBA in the system has access to the logical drives for which multi-path will be
used.
3. Click Finish.