HP Array Configuration Utility User Guide (416146-001, January 2006)

Scripting in ACU 41
Message Comment or explanation (if not self-explanatory)
Cannot create array.
The controller either has no unassigned physical drives, or it already
has the maximum number of arrays or logical drives.
Cannot create logical drive.
There is no free space on the array, or the maximum number of
logical drives has already been reached.
Cannot expand array.
The controller does not support expansion, or the current
configuration of the controller does not allow expansion.
Cannot extend logical drive.
The controller does not support extension, or the current
configuration does not allow extension. For example, if there is no
free space on an array, extension is not supported.
Cannot migrate logical drive
RAID.
The controller does not support RAID migration, or the current
configuration of the controller does not allow migration.
Cannot migrate logical drive stripe
size.
The controller does not support stripe size migration, or the current
configuration of the controller does not allow migration.
Cannot remove physical drives
from existing array.
You have inadvertently omitted one or more physical drives from the
drive list when reconfiguring an existing array. ACU does not allow
this because removing physical drives from a configured array
causes data loss.
Controller (text) is invalid. The controller specifications are not entered correctly.
Controller does not support
ChassisName.
Controller does not support
controller SSPState. Use the
LogicalDriveSSPState command to
set SSP states for each logical
drive.
Controller does not support license
keys.
Controller does not support logical
drive SSP states. Use the SSPState
command to set the controller SSP
state.
Controller does not support
redundancy settings.
The controller is not redundant or does not support redundancy
settings.
Controller does not support SSP.
Controller has maximum number
of license keys.
Controller is locked by another
machine or user.
Controller requires non-failed
physical drives to set license keys.
Controller requires physical drives
to set license keys.
Could not detect controller (text). —
Error communicating with
controller.
Error saving controller. There is a problem saving one or more controller configurations.
Failure opening capture file (text). —
Failure opening input file (text). —