HP StorageWorks 1000/1500 Modular Smart Array application note: Migrating to active/active controllers in NetWare environments (434884-001, October 2006)

Migrating to active/active controllers in NetWare environments 9
Troubleshooting
If the paths are not seen, check the following:
Step Description Check
1
Check to ensure that the cables are properly connected to the fabric and hosts.
F
2
Verify that multi-path options are set properly as mentioned in ”Upgrading the MSA to
active/active” on page 7.
F
3
Verify that the controllers are seen by the hosts.
From the server console, enter: list storage adapters
F