HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

Message Type
Description Action
07 CLONE FIRMWARE?
‘<'=NO, ‘>'=YES
User input
In dual-controller configurations
only, the array controller has
detected a firmware version
mismatch with the two controllers
and wants to copy the firmware
from the other controller onto
this controller. Firmware on both
controllers must match.
Scroll through and read the
messages on both controller LCD
panels to confirm the currently
installed firmware versions on
the controller. Then, respond
appropriately to the prompt.
<=No,donotclone.
> = Yes, proceed with the cloning.
No input = Yes, proceed with the
clone.
During a restart of the MSA
chassis, the controller with the
latest version of firmware is cloned.
If a new or replacement controller
is hot added, the firmware on
the already installed and active
controller is cloned, even if less
recent.
08 CONTROLLER TOO
OLD NOT SUPPORTED
Error
During startup, the firmware
examines the hardware to ensure
that it is supported for use with the
version of installed firmware.
This controller is not supported.
Contact HP support.
09 PILOT 2 CONTRLR
NOT SUPPORTED
Error
During startup, the firmware
examines the hardware to ensure
that it is supported for use with the
version of installed firmware.
This controller is not supported.
Contact HP support.
10 FIRMWARE FLASH
FAILED
Error
ROM flash failed.
Download new firmware from
the HP website and initiate the
firmware update again.
If the issue persists, contact HP
support.
11 CLO
NING REFUSED
SYSTE
M HALTED
Error
A firmwa
re mismatch was detected,
messag
e 07 CLONE FIRMWARE?
'<'=N
O, '>'=YES was
displ
ayed, and the user selected <
for “N
o”.
Firmware on the controllers must
be updated to be the same.
12 ONLINE UPGRADE
FLASHING FIRMWARE
Informational
An online firmware update is
starting.
13 ONLINE UPGRADE
FLASHING STARTED
Informational
An online firmware update is in
progress.
14 ONLINE UPGRADE
FLASHING DONE
Informational
An on
line firmware update has
comp
leted.
15 ONLINE UPGRADE
FLASHING FAILED
Error
An online firmware update has
failed.
Download new firmware from
the HP website and initiate the
firmware update again.
If the issue persists, contact HP
support.
16 ONLINE UPGRADE
RESTARTING SYSTEM
Informational
An online firmware update is
forcing an automatic restart of the
system.
17
ONLINE UPGRADE
CO
MPLETE
In
formational
An online firmware update has
completed successfully.
1510i Modular Smart Array installation and user guide
109