HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

Message Type
Description Action
307 FIRMWARE FLASH
DONE
Informational
The array controller in the MSA
has completed the firmware flash
process. It is now safe to restart
the MSA and begin using the
new firmware. In dual-controller
configurations, the new firmware
is cloned onto the other controller
during the startup routine.
308 FIRMWAR
E FLASH
FAILED
Error
The array co
ntroller in the MSA has
failed the fi
rmware flash process.
Attempt the flash process again.
If the issue
persists, contact HP
support.
309 EMU FLASH
STARTED
Informational
The EMU has started the firmware
flash process. Do not turn off the
power to the system until it has
completed. This could take five
minutes.
310 EMU FLASH DONE
Informational
The EMU has completed the
firmware flash process. It is now
safe to turn off power to the system.
311 EMU FL
ASH
FAILED
Error
The EMU has failed the firmware
flash process.
Attempt the flash process again.
If the iss
ue persists, contact HP
support
.
312 FIRMWARE FLASH
STARTED ON BOX <n>
Informational
A firmware flash operation has
startedonanattachedstorage
enclosure.
313 FIRMWARE FLASH
DONE ON BOX <n>
Informational
A firmware flash operation has
completedonanattachedstorage
enclosure.
Restart the storage enclosure to
enable the new firmware.
314 FIRMWARE FLASH
FAILED ON BOX <n>
Error
A firmware flash operation has
failed on an attached storage
enclosure.
Attemp
ttheflash process again.
If the issue persists, contact HP
support.
315 ISCSI MODULE
FLASH STARTED
Informational
Indicates that the array controller
has detected out-of-date firmware
on the iSCSI daughter board and
is updating the firmware. Do not
turn off power to the MSA until it
hascompleted. Thiscouldtake
several minutes.
316 ISCSI MODULE
FLASH DONE
Informational
Indicates that the array controller
has completed updating the
firmware on the iSCSI daughter
board. Restart the MSA to activate
the new firmware.
Restart the MSA to activate the
new iSCSI firmware before using
iSCSI functionality.
3
17 ISCSI MODULE
F
LASH FAILED
Error
Indicates that the array controller
was unable to update the firmware
on the iSCSI daughter board.
R
etry the operation. Contact HP
s
upport if the problem persists.
318 FAN FLASH
STARTED ON BOX
#<n>
Informational
Indicates that the array controller
has detected out-of-date firmware
on a fan module in the indicated
storage enclosure and is updating
the firmware. Do not turn off power
to the MSA until it has completed.
This could take several minutes.
1510i Modular Smart Array installation and user guide
123