HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)
volume rebuild failure,119
volume state disabled,118
volume state failed,118
volume state missing drives,119
volume state wrong hard drive replaced,119
Ethernet cables
connecting,51
recommendation,51
F
fan module
LEDs,28
fan modules,28
fault tolerance, removing hard drives,97
FCC logo,129
Federal Communications Commission notice,
129
fimware
accessing the SMU to update, note,82
firmware
cloning,88
cloning in redundant configurations,78,78
ISO images,82,85
MSA controller
updating,79
obtaining,82,85
overview,79
recovering corrupted,91
updating,81
updating using the SMU,82
front panel
diagram,14,19
G
grounding methods,134
H
hard drive
ejector levers,97,99
installing,98
latches,97,99
LEDs
amber,23
recognizing,99
reconstructing,99
removing,97
removing in fault-tolerant systems,97
replacing,96
securing,99
hard drive failere
during system rebuild,96
hard drive failure
compromised fault tolerance,94
compromised fault tolerance, causes,94
compromised fault tolerance, recovering,94
data recovery, automatic,95
effects,93
LEDs,93
recognizing,93
recovering,93
hard drive firmware
updating,89
hard drives
approved models,46
caution,41
installing,46
migrating,101
from one controller to another, 101
supported,46
help
obtaining,11,33
High Availability website,34
HP
series number,130
Subscriber’s Choice for Business,32
technical support,11
HyperTerminal emulator program,85
I
indicators
fan module,28
informational messages
array controller restarting,121
array controller temperature ok,121
auto-upgrade done,124
auto-upgrade in progress,124
auto-upgrade requires reboot,124
beacon off,121
beacon on ,121
cache batteries low, recharging,115
cache disabled no configuration,115
cache hardware enabled,114
cache hardware temporarily disabled,115
cache module # MB,114
configured volumes,119
EMU fl ash done,123
EMU flash started,123
Ethernet module detected,127
fan flashdoneonbox#,124
fan flash started on box #,123
firmware flash done,123
firmware flashdoneonbox#,123
firmware flash started,122
firmware flash started on box #,123
firmware version,107
hard drive hot added box bay,117
hard drive hot removed box bay,117
hard drive position change detected,117
hard drive position charge invalid,117
initializing iSCSI subsystem,127
156