HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

initializing PCI subsystem,126
initializing redundancy support,111
initializing SCSI subsystem,110
initializing subsystem,110
initializing target-based mgmt,127
iSCSI module flash done,123
iSCSI module flash started,123
loading iSCSI params,127
management port <n> disabled,127
management port <n> enabled,127
new volume(s) detected,120
no volumes detected,120
non-compaq hard drive,118
obsolete cache data deleted,115
online upgrade complete,109
online upgrade flashing done,109
online upgrade flashing firmware,109
online upgrade flashing started,109
online upgrade redundancy halted,110
online upgrade restarting system,109
persistent mem disabled,126
persistent mem enabled,126
port <n> IP <ip>,127
port <n> link ok <speed> Mb/s,127
processor rev <n>,128
recovery ROM autoflash done,122
recovery ROM autoflash started,121
redundancy active active controller,111
redundancy active standby controller, 111
redundancy halted expand active,112
redundancy halted firmware cloned,112
replacement hard drive found box,117
restarting system,108
ROM cloning done,122
ROM cloning started,122
scanning SCSI subsystem,110
smart hard drive alert box,117
spares cleared,120
startup complete,107
storage box EMU version,125
storage box fan hot inserted,124
storage box fan hot removed
,124
storage box fan OK,124
storage box hot added,125
storage box hot removed,125
storage box power supply added,125
storage box power supply ok,125
storage box power supply removed,125
storage box temperature ok,124
system name,108
valid cache data found at power up,114
volume expansion disabled,119
volume initializing parity,119
volume media exchanged,119
volume state deleted,119
volume state expansion active,118
volume state interim recovery,118
volume state ok,118
volume state rebuilding,118
volume state waiting to expand,118
volume state waiting to rebuild,118
Infrastructure website,34
initiator
overview of,17
Insight Manager
description,39
website,34
installation
additional SCSI port, bus, box numbers,47
assistance, HP,33
getting started,31
hard drive,98
rack–mounting the MSA1510i,41
installing
hard drives,46
option kits,39
rack rails,43
installing the MSA1510i, best practices,34
international notices and statements, 131
IP address information
worksheet,143
iSCSI
best practices,17
overview of,17
iSCSI concepts
concepts guide,31
iSCSI concepts and deployment guide,31
iSCSI terminology
concepts guide,31
L
laser compliance,130
latches, hard drive,97,99
LCD display,56
LCD message descriptions,107
LC D m e s sa g es a t M SA 1510 i s t a r t u p ,56
LCDs
message descriptions,107
LEDs
2-Port Ethernet iSCSI module,27
chassis, component,21
controller,22
defined,21
enclosure status,21
fan module,28
hard drive access,97
hard drive tray,99
hard drive, operational,23,25
MSA module, diagram,26
online,97
patterns,19
power supplies,30
power supplies, diagram,30
power supplies/fan assemblies,28
SATA hard drive, diagram,25
SCSI hard drive, diagram,23
SCSI I/O module,29
SCSI I/O module, diagram,29
LEDs, of the MSA1510i at startup,55
1510i Modular Smart Array installation and user guide
157