HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

Chassis specifications
Parameter
Value
Height
8.78 cm (3.46 in.)
Width
48.41cm(19.06in.)
Depth
61.77cm(24.32in.)
Weight 24.95 kg (55 lb
)
Input voltage requirements
Rated input voltage
100 to 240 VAC
Rated input fr
equency
47 Hz to 63 Hz
Ratedinputcurrent 6.4AMax,1Atypical
Input power (max)
400W Max, 95W typical
Power supply
specifications
Rated steady-state power
377 watts
Maximum peak power
681 watts
BTUs
2187 BTU/hr
*
Temperature range
Operating
10° to 35°C (derated 1°C per 1000 feet of elevation
to 10000 ft.); (50° to 95°F)
Shipping
-30° to 50°C (-22° to 122°F)
Relative humidity (noncondensing)
Operating 10% to 90%
Non-opera
ting Up to 95%
Maximum wet-bulb temperature
Long term storage
29°C (84.2°F)
Short ter
mstorage
30°C (86°F)
Idle <6.9 and 53
Fixed drive (random writes) <7.3 and 54
*Inputpo
wer and heat dissipation specificationsaremaximumvaluesandapplytoworst-caseconditions
at full r
ated power supply load. The power/heat dissipation for your installation varies depending on the
equipment configuration.
Preparing the network
Preparing the network for the MSA1510i includes:
• Prepar
ing the servers
• Preparing the switches
NOTE:
For optimum network performance, use 1000BaseT Ethernet NICs, 1000BaseT switches, and qualified
Category 5e (or better) cables throughout the network.
38
Installation