HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

10. SlidetheMSA1510iintotherackuntilthefrontedgeisﬂush with the front of the rack. Then, secure

the MSA1510i to the front of the rack by tightening the thumbscrews on the front of the MSA1510i.

11 . From the rear of the rack, secure the rear of the MSA by sliding the retaining bracket toward the

MSA1510i, until the tab engages the slot in the MSA chassis. Then, tighten the thumbscrew on

the bracket.

12. Replace the front bezel by aligning the pins and retaining clips on the back of the bezel with the

corresponding locations on the front of the chassis. Then, with even pressure, push ﬁrmly on the

bezel until the retaining clips engage.

1510i Modular Smart Array installation and user guide