HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

Connecting Eth
ernet cables in a multipath configuration
In the followin
g illustration, additional items and cabling connections are needed in a multipath
configuration.
1
Additional iSCSI Ethernet network switch
2
Additional MSA 2–Port Ethernet iSCSI module
3
Additional Ethernet cables for the redundant path
Connecting power cords
To protect your system from power-failure-related downtime, each MSA1510i ships standard with a
redundant power supply. Depending on how you connect the power supplies to your power source, you
can eliminate downtime caused by power-related failures.
When c
onnecting the power cords, use the power cords shipped with the MSA1510i.
After
power is supplied to the MSA1510i, the power supply automatically senses the input voltage and the
LED behind the power switch illuminates as solid amber.
52
Installation