HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

d. Expand the drop-down boxes and enter the following settings:

• Local ada

pter: Microsoft iSCSI Initiator

• Source IP: Enter the IP address of the NIC that has access to the target portal that you

want to connect to (and will enter in the next step).

•TargetPo

rtal: Select the destination target portal you want to connect to.

(Example: 100.10.1.20:3260)

IMPORTANT:

Several Target Portal IP addresses may be presented. Be sure that the Source IP address

and the corresponding Target Portal have a viable path. The ping command can be

used to verify that the path is accessible.

e. Click OK.

The Targets tab is updated and redisplayed.

Conﬁguration