HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

f. Viewthedisplay.ItshouldnowshowaStatusofConnected for that path to the target.

NOTE:

If the status is not Connected, do the following to eliminate one of the following common mistakes:

•Makethes

econd connection.

• Verify that the Source IP address and the Target Portal are correct.

4. In multipathing environments only, repeat step 3 for the IP address and portal associated with

the secondary controller. (Example: 100.30.1.20:3260)

NOTE:

It is a common mistake to not make the second connection or to not ensure that the Source IP

address and the Target Portal are correct.

5. Verify the connection status to the target.

a. On the Targets tab, select the target and then click Details.

1510i Modular Smart Array installation and user guide