HP StorageWorks 1510i Modular Smart Array installation and user guide (383070-002, July 2008)

3. To make any changes to the existing CHAP parameters, click Conﬁgure.

The CHAP Authentication dialog box opens.

4. To kee

p CHAP enabled, make sure Use the following CHAP credentials is selected.

5. To use a new CHAP name, uncheck the Use initiator name check box, and enter the name

of your choice.

6. If ne

eded, specify the CHAP secret.

All new targets will use the CHAP secret to authenticate the initiator. Any established sessions

are not affected.

7. Click OK to save changes.

8. Perform a rescan.

1510i Modular Smart Array installation and user guide