HP StorageWorks Simple SAN Connection Manager user guide (5697-0083, August 2009)
38 Getting started
Figure 15 Set Switch Admin Password dialog box: new switch setup
8. In the Set Switch Admin Password dialog box, complete the following steps:
a. Enter the Old Password (the factory default password for the switch is password).
b. Enter a New Password (at least 8 alphanumeric characters).
c. Re-enter the new password in the Verify Password box.
d. To set the switch admin password, click OK. To cancel password setup, click Cancel.
9. A message box confirms successful password change completion. Click OK to close the message box.
The New Switch Setup dialog box now shows a check mark next to the second step, “Set switch
administrator password,” (Figure 16) indicating that you have completed that task.
Figure 16 Second step of New Switch Setup completed
10. A message box asks if you want to set the switch zoning. Choose one of the following options:
• To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog
box (Figure 17) opens. Go to step 9.
• To set the switch zoning later, click No. (See “Setting the switch default zoning,” page 53, for a
procedure for changing the switch zoning.)